The Fujitsu PRIMERGY RX100 S8 is an entry mono socket rack server designed to meet small budgets by delivering high energy efficiency and a rich set of optional expansions to meet individual demands. Optimized for infrastructure and communication applications, this 1U server delivers up to 32 GB RAM, up to 3 PCIe slots and up to 10 hard disk drives
Features & BenefitsTechnical DetailsComponentsDocumentsSupport PacksPress ReleaseCase Studies
Features & Benefits
| Features | Benefits |
|---|---|
| High energy efficient Fujitsu ServerView™ suite and onboard remote management features (iRMC S4) enables centralized management Cool-safe® Advanced Thermal Design enables operation in a higher ambient temperature |
Clear reduction in energy costs Comprehensive and simplified management reduce time for standard administration tasks Each additional degree means approximately 5-6 percent less energy costs for air-conditioning |
| Intel Xeon processor E3-1200 v3 and up to 32 GB RAM, up to 3 PCIe slots and up to 10 hard disk drives Free choice: Up to 4x 3.5-inch or up to or 10x 2.5-inch storage drives Optional pGFX Server Graphics Nexperience Design and enhanced control panel |
Cost-optimized foundation for file, infrastructure and communication applications Flexible to meet the individual demand Huge storage capacity fulfill requirements of storage demanding application or services Unprecedented media transcoding performance Enhanced usability |
| Choice of Intel® Xeon® E3 v3, Core™ i3, Celeron® and Pentium® processors Modular RAID controllers Redundant fans Hot-plug and redundant power supply (PSU) with platinum efficiency (94%) Full-height PCIe slot |
Perfectly meet the performance requirements with available budget Match redundancy requirements with available budget |
Technical details
| Chipset | Intel® C226 |
|---|---|
| Mainboard type | D3229 |
| Product Type | Mono Socket Rack Server |
| Processor | Intel® Xeon® processor E3-1200v3 product family, Intel® Core™ i3 processor, Intel® Pentium® processor |
| Memory | 2 GB – 32 GB, DIMM (DDR3) UDIMM |
| Memory protection | ECC |
| Drives (optional) | DVD supermulti, ultraslim, SATA I |
| PCI-Express 3.0 x8 | 2 x Low profile Length 175mm; PCIe slot 1 = dedicated Modular RAID slot |
| PCI-Express 2.0 x4 (mech. x8) | 1 x Low profile |
| Slot Notes | Optional support of 1x full height PCIe Gen3 x8 card, instead of 1x PCIe Gen2 x4 and 1x PCIe Gen3 x8 |
| Accessible drive bays | 1 x 5.25/0.4-inch for CD-RW/DVD |
| Optional accessible drives | Following limitations applies to 10x 2.5-inch HDD base unit: No CD-RW/DVD, 1x USB 2.0 at the front, no front VGA |
| Storage drive bays | 4/8 x 2.5-inch hot-plug SAS/SATA or 4x 3.5-inch hot-plug SAS/SATA or 10 x 2.5-inch hot-plug SAS/SATA as soon as released Max. 4x 3.5-inch Max. 8x 2.5-inch Max. 10x 2.5-inch |
| Storage drives | HDD SATA, 6 Gb/s, 250 GB, 7,200 rpm, hot-plug, 3.5-inch, economic HDD SATA, 6 Gb/s, 500 GB, 7,200 rpm, hot-plug, 3.5-inch, economic HDD SATA, 6 Gb/s, 1 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SATA, 6 Gb/s, 2 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SATA, 6 Gb/s, 3 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SATA, 6 Gb/s, 4 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SATA, 6 Gb/s, 500 GB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SATA, 6 Gb/s, 1 TB, 7,200 rpm, hot-plug, 2.5-inch, business critical HDD SATA, 6 Gb/s, 250 GB, 7,200 rpm, hot-plug, 2.5-inch, business critical HDD SATA, 6 Gb/s, 500 GB, 7,200 rpm, hot-plug, 2.5-inch, business critical HDD SAS, 6 Gb/s, 1 TB, 7,200 rpm, hot-plug, 2.5-inch, business critical HDD SAS, 6 Gb/s, 500 GB, 7,200 rpm, hot-plug, 2.5-inch, business critical HDD SAS, 6 Gb/s, 1.2 TB, 10,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 300 GB, 10,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 450 GB, 10,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 600 GB, 10,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 900 GB, 10,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 146 GB, 15,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 300 GB, 15,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 450 GB, 15,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 600 GB, 15,000 rpm, hot-plug, 2.5-inch, enterprise HDD SAS, 6 Gb/s, 300 GB, 15,000 rpm, hot-plug, 3.5-inch, enterprise HDD SAS, 6 Gb/s, 450 GB, 15,000 rpm, hot-plug, 3.5-inch, enterprise HDD SAS, 6 Gb/s, 600 GB, 15,000 rpm, hot-plug, 3.5-inch, enterprise HDD SAS, 6 Gb/s, 1 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SAS, 6 Gb/s, 2 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SAS, 6 Gb/s, 3 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical HDD SAS, 6 Gb/s, 4 TB, 7,200 rpm, hot-plug, 3.5-inch, business critical SSD SATA, 6 Gb/s, 100 GB, Mainstream Endurance, hot-plug, 2.5-inch, enterprise SSD SATA, 6 Gb/s, 200 GB, Mainstream Endurance, hot-plug, 2.5-inch, enterprise SSD SATA, 6 Gb/s, 400 GB, Mainstream Endurance, hot-plug, 2.5-inch, enterprise SSD SATA, 6 Gb/s, 800 GB, Mainstream Endurance, hot-plug, 2.5-inch, enterprise SSD SATA, 6 Gb/s, 100 GB, Mainstream Endurance, hot-plug, 3.5-inch, enterprise SSD SATA, 6 Gb/s, 200 GB, Mainstream Endurance, hot-plug, 3.5-inch, enterprise SSD SATA, 6 Gb/s, 400 GB, Mainstream Endurance, hot-plug, 3.5-inch, enterprise SSD SATA, 6 Gb/s, 800 GB, Mainstream Endurance, hot-plug, 3.5-inch, enterprise |
| I/O controller onboard | Intel® C226, 1 port used for accessible drive 4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux; 4-port SATA 6Gb with RAID 0, 1, 10 4-port SATA 3GB with RAID 0, 1, 10 Integrated RAID 0/1 or RAID 5/6 controller (option), additional RAID controller options are described under Components RAID controller 4 port SATA with RAID 0/1/10 for HDDs Intel® i210 onboard 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration) Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller), IPMI 2.0 compatible |
| Trusted Platform Module (TPM) | optional TPM |
| Standard power supply output | 300 W (92% efficiency) |
| Hot-plug power supply output | 450W (94% efficiency) |
| Power supply configuration | 1x standard power supply or1x hot-plug power supply or 2x hot plug power supplies for redundancy |
| Active power (max. configuration) | 197 W |
| Weight | up to 13 kg |
| Rack (W x D x H) | 482.6 mm (Bezel) / 435.4 mm (Body) x 572 x 42.8 mm |
| Server Management | Server Management |
| Option | ServerView Suite – Maintain iRMC Advanced Pack incl. Advanced Video Redirection (AVR), video capturing and Virtual Media, ServerView Suite – Dynamize Virtual-IO Manager (VIOM), ServerView Suite – Integrate Integration pack for Fujitsu ManageNow® solution |
| Special features | High density housing, RemoteView/ iRMC advanced pack optional; PDA; ASR&R as standard; dedicated or shared service LAN at buyer’s choice; ServerView Power Management standard; hard disks hot-plug. |
| Standard Warranty | 1 year |
| Service Level | Onsite Service |
| Service Lifecycle | 5 years after end of product life |
| Service Weblink | http://www.fujitsu.com/fts/services/support |
Components
| QLE2560 Fibre Channel Host Bus Adapter | |
|---|---|
 |
The QLE2560 is a PCI Express, single port, Fibre Channel Host Bus Adapter. The HBA offers the next generation 8Gb Fibre Channel technology, meeting the business requirements of the enterprise data center. A wide range of supported Operating Systems and certifications for storage devices ensure a broad set of application scenarios. |
| QLE2562 Fibre Channel Host Bus Adapter | |
 |
The QLE2562 is a PCI Express, dual port, Fibre Channel Host Bus Adapter. The HBA offers the next generation 8Gb Fibre Channel technology, meeting the business requirements of the enterprise data center. A wide range of supported Operating Systems and certifications for storage devices ensure a broad set of application scenarios. |
| LPe1250 Fibre Channel card | |
 |
Streamlined installation and management, unrivaled scalability, and industry-leading virtualization support make the single-channel LPe1250 Fibre Channel host bus adapter (HBA) an ideal solution for mixed-OS SAN environments. With powerful management capabilities and broad platform support, it delivers maximum performance in the broadest range of applications and environments. |
| LPe12002 Fibre Channel card | |
 |
Streamlined installation and management, unrivaled scalability, and industry-leading virtualization support make the single-channel Emulex LightPulse LPe12000 and dual-channel LPe12002 Fibre Channel host bus adapters (HBA) ideal solutions for enterprise, mixed-OS and virtual server environments. |
| LPe16000 / LPe16002 Fibre Channel cards | |
 |
The new 16 Gb/s Fibre Channel Host Bus Adapters (HBA) for the PRIMERGY servers are optimal Fibre Channel HBAs for virtualized, cloud and mission critical deployments. The Fibre Channel HBA LPe16000/16002 take performance to a new level with PCIe 3.0 support, data integrity capabilities, cloud scale reliability, and ease of use. Organizations looking to improve performance, protect against data corruption, and simplify operations of FC SANs in cloud or high performance environments can benefit from deploying the LPe16000/16002. |
| RAID Controller – SAS 6Gb/s RAID 5/6 512MB (D2616) | |
 |
The 8 port Fujitsu D2616 SAS/SATA RAID controller sets new standards in the fields of speed and data security for internal server memories. With a data transfer of up to 6Gb/s per port the PRIMEGY Modular RAID Controller family is extended to included the latest technology. |
| D2607 SAS/SATA RAID controller | |
 |
The Fujitsu D2607 SAS/SATA RAID controller, based on the LSI SAS2008, offers small businesses exactly the low-cost data safety unit which they have been looking for. The D2607 enables increased read/write performance thanks to its RAID 0, 1 and 10 implementation. |
| RAID Controller SAS 6Gbit/s 1GB (D3116C) | |
 |
The 8 port Fujitsu RAID Controller SAS 6Gbit/s 1GB (D3116C) sets new standards in the fields of speed and data security for internal server memories. With a data transfer of up to 6Gbit/s per port the PRIMEGY Modular RAID Controller family is extended to included the latest technology. |
| SAS9200-8e 6Gb/s 8ext PCIe FH/LP | |
 |
The LSI SAS9200-8e, dual port, host bus adapter provides high performance connectivity for external JBOD and external RAID enclosures. The LSISAS9200-8e provides 8 lanes of 6Gb/s SAS connectivity to 8 lanes of PCI Express 2.0 5Gb/s performance to eliminate bottlenecks. |
| Intel® CT Desktop LAN Adapter | |
 |
Specifically, the Intel Gigabit CT Desktop Adapter uses auto-negotiation to ensure the adapter runs at the highest available network speed (10, 100, or 1000 Mbps), and it maintains full bandwidth capacity with the dedicated bandwidth of a PCI Express input/output (I/O) bus to provide connectivity you can count on. |
| Converged Network Adapter | |
 |
As a member of the Emulex OneConnect Universal CNA family, the OCe10102-F uses a 10Gbps DCB or Enhanced Ethernet infrastructure for networking and storage, reducing capital expense (CapEx) for adapters, switches and cables, and operational expense (OpEx) for power, cooling and IT administration. |
| PRIMERGY 10Gb Modular LAN Adapter | |
 |
The new Fujitsu Ethernet D2755 Server Adapter is the most flexible and scalable Ethernet adapter for today’s demanding data center environments. The Fujitsu Ethernet D2755 Server Adapter addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization, flexibility for LAN and SAN networking, and proven, reliable performance. |
| X540-T2 2x 10GBase-T LAN Adapter | |
 |
The X540-T2 adapter hosts Intel’s latest Ethernet silicon, which uses a single chip solution for “LAN on Motherboard” (LOM) to deliver 10 Gigabit Ethernet (10 GbE) on the latest server platforms. 10GBase-T simplifies the transition to 10 GbE and it can be deployed anywhere in your data center. |
| PLAN CP 2x1Gbit Cu Intel® I350-T2 | |
 |
Trust the network communication of the new Ethernet LAN adapter. The new Intel® I350-T2 Ethernet LAN Adapter, based on the Intel® 1GbE LAN Powerville chip, offers two Gigabit Ethernet ports for 10/100/1000BaseT. |
| PLAN CP 4x1Gbit Cu Intel® I350-T4 | |
 |
Trust the network communication of the new Ethernet LAN adapter. The new Intel I350-T4 Ethernet LAN Adapter, based on the Intel® 1GbE LAN Powerville chip, offers four Gigabit Ethernet ports for 10/100/1000BaseT. |
| PRIMERGY graphics card 512 MB from NVIDIA | |
 |
The NVIDIA Quadro NVS 300 (512 MB, PCIe x1) is specially designed to supply excellent 2D graphics performance when installed in a PCIe x1-slot, but it is also compatible with PCIe x4, x8 and x16 extension slots. |
Documents
Support Packs
| Support Pack Options | Globally available in major business areas: 9×5, Next Business Day Onsite Response Time 9×5, 4h Onsite Response Time 24×7, 4h Onsite Response Time |
|---|---|
| Recommended Service | 24×7, Onsite Response Time: 4h – For locations outside of EMEA please contact your local Fujitsu partner. |
Documents
Hardware Maintenance & Software Support Offerings at a Glance
Press Release
- Munich/San Francisco , August 25, 2014
- Munich , October 16, 2013
- Munich , July 15, 2014
- Munich , July 07, 2014
- Munich , July 07, 2014
Case Studies
- United Kingdom , Industry: Aerospace and Defense
- United Kingdom , Industry: Local Government
- Serbia , Industry: Retail-Wholesale
- Germany , Industry: Manufacturing
- Germany , Industry: IT Industry